How Much Does it Cost to Install a Gas Line in Edmonton?

Tips and Advice

Sharing our knowledge and expertise on furnaces, plumbing, gas fitting, and more!


How Much Does it Cost to Install a Gas Line in Edmonton?


It’s no secret that so many appliances we depend on everyday rely on natural gas. In Edmonton, some of the most common gas-powered appliances include BBQs, kitchen stoves, fireplaces, garage heaters, deck heaters, fire tables, and clothing dryers.

However, what is a mystery is how much it costs to install a gas line in Edmonton and how this price tag is formed. While it is difficult to lay out a precise pricing formula given the number of contributing factors, in this article we hope to give you – the end consumer – a clearer understanding of what to expect and consider; similar to what we strived for in our guide to furnace repair costs in Edmonton

The average cost to install a gas line in Edmonton

Based on our experience, we have found the cost to install a gas line in a Edmonton residence ranges from about $700.00 – $1,500.00.

For an accurate quote, it is necessary for an on-site inspection. Below are 8 factors that we will consider when determining the scope of the project and final cost.

1. Gas Supply Capacity

Gas fitting, gas line installation

One of the first things we do when we arrive on site to conduct our free estimation is to determine if the existing system has the capacity to install the new gas appliance. It is possible that the meter does not have the capacity, in which case the gas company will be more than glad to install a larger meter free of charge as they will be selling more gas.

2. Length of Gas Line

 Brian Plumbing & Heating has installed hundreds of gas lines ranging in length from a mere foot to hundreds of feet in a commercial application.

The length of the gas line affects not only the time involved for the installation but the size of pipe necessary to deliver the correct amount of gas to the appliance as the further away you get from the source of gas to the appliance, the larger the pipe needs to be due to friction loss.

Another factor to consider is the fact that a gas line less than 20 feet does not require a pressure test, only what is called a service test, basically checking the joints with soapy water. No bubbles, no troubles! Over 20 feet, there is to be a pressure test witnessed by the city inspector, and a return trip to tie the gas line into the supply, obviously a more time consuming situation. For more information on this subject, be sure to read the City of Edmonton’s detailed overview on Residential Gas Permits.

3. Number of Offsets

A gas line offset is a change in direction of the pipe.
A gas line offset is a change in direction of the pipe.

It is one thing to hang a piece of pipe that is 20 feet long into a couple of hangers in your basement ceiling, now cut that same piece 6 times, thread each piece, add fittings and additional hangers and one can see clearly how that same 20 feet of pipe has now taken you 3 times as long to install.

The number of offsets has a huge bearing on a final quote.

4. Accessibility

In other words, how accessible is the area where the gas line is to be installed? Are we running the gas line through  difficult surroundings, like under a deck, in a crawl space, through an attic,  or is it 50 feet in the air, requiring a man lift?. These are all accessibility factors that go into pricing a gas line installation.

5. Location


Similar to accessibility, location also plays a role in gas line installation and the total cost. What we are taking into consideration here is will the gas line will be located:

  • Through the house
  • Outside of the house
  • Underground
  • Or a combination of the above

6. Size of Pipe


Pipe size is determined by distance and the amount of BTU required. It goes without saying that the larger the pipe, the more expensive it will be.

 Brian Plumbing & Heating always over sizes for the addition of future gas appliances.

For example, we run a gas line to your deck for a barbecue. We will ensure you can add a deck heater or elegant fire table down the road by installing a larger gas line which really only costs a few extra dollars and saves you having to run a new line in the future.

7. Type of Pipe

There are several types of pipe that can be used to transmit gas, each one impacting the final cost differently. We’ve listed the four main types below that you will find in Edmonton, from most expensive to least expensive:

  1. CSST (most expensive)
  2. Copper
  3. Steel
  4. Plastic (least expensive)

8. Permit and Inspection


A common question we receive is whether one needs a permit. In all cases, the answer is a simple: yes! Any alteration or addition to a gas system, unless downstream of an appliance shut off, requires a permit and inspection. Brian Plumbing and Heating will provide the permit and arranges the inspection on any work we contract.

Read our article Gas Permits in Edmonton – The Complete Guide for more information on gas permits.

Do you have questions or are you interested in a quote?

We Are Here To Help

Contact us now for reliable and trusted plumbing, heating and gas fitting services 7 days a week! (Subject to availability).

Recent Posts

Edmonton gets real cold in winter. Very, very cold. We get temperatures as low as -40°C. Temperatures this low can cause homeowners all kinds of problems: cars that won't start; outside locks that freeze; frozen window locks, and; frozen outside garden hose taps.

Weil-McLain Indirect Water Heaters are a great accessory to your home or business’s hydronic heating system. Unfortunately they do, like all the equipment in your boiler room, have a limited life span and will need to be replaced at some point.

Many individuals ask us “How Much Does A Garage Heater Cost To Install In Edmonton?” Let us shed some light on this question. Installing a Garage Heater can be a nice addition to your level of comfort in your home. As a result they keep your car warm, keep the